Megasquirt store

français English

Welcome to EFi4Tuning store.

updated janv 17. 2010

Product Categories

NEW

NEW 3 Bar and 4 bar map sensor and AtmoMap (dual map)

DB-37 megasquirt connector has been replace with this commercial connectors setup.

Handle Coils and injectors current more than ever

How to buy ? click

for any item needed, see below. Dollars are in us$

1 Select a computer listed bellow with basic hardware configurations
2 add options from the menu ; coil outputs, idle control...
3 Select your harness
4 Select accessories to complete wiring
5 See sensors
6 See checkout if you got anything you needed.

Basic computer configuration include:

-Adaptor board with 14 pins connector input and 16 pins connector output
-14 pins, 16 pins cable connectors and 30 crimp pins
-2 Direct coil driver on adaptor board
-Power Mosfet for idle control(PWM or on/off) or GPIO.
-Single input VR ou Hall (or optical), selectable with jumpers

Note.Cable connectors ll be included when buy a cable.

Megasquirt ECU

Megasquirt MS1V3

-V3 board; Through hole parts board recommended for prototyping.
-Megasquirt 1 processor
-Full loaded unit
-Laser cutted and black anodized end plates.
-14 and 16 pins I/O connector .
-Anodized heavy duty enclosure

(previous case pisture);

RED Enclosure

ms1v3

Basic configurations :368$ us$

input

Add options here

Megasquirt MS2V3

-V3 board; Through hole parts board recommended for prototyping.
-Megasquirt 2 processor
-Full loaded unit
-Laser cutted and black anodized end plates.
-14 and 16 pins I/O connector
-Anodized heavy duty enclosure

Basic configurations :458$ us$

input

Add options here

Megasquirt MS1V3.57

-V3 board; Surface mount parts board recommended for tuners and experimented users.
-Megasquirt 1 processor
-Full loaded unit
-Laser cutted and black anodized end plates.
-14 and 16 pins I/O connectors .
-Anodized heavy duty enclosure

ms1V3.57

Basic configurations :398$ us$

input

Add options here

Megasquirt MS2V3.57

-V3 board; Surface mount parts board recommended for tuners and experimented users.
-Megasquirt 2 processor
-Full loaded unit
-Laser cutted and black anodized end plates.
-14 and 16 pins I/O connectors .
-Anodized heavy duty enclosure

ms1v3

Basic configurations :461$ us$

input
output

Add options here

Input/ output Options

Ignition

4cylinders wasted spark .
Works with coilpack with and without ignitor.
Ford 4 towers coil pack or 2 double coil pack 2 towers (GM type, Bosch...)

2 X VB921 coil drivers.
-the 2 Drivers are assembled on the adaptor board.

2 VB921 coil drivers. :0 $ included

4 cylinders one coil/cyl.
Works with 4 coils with and without ignitor.

Same setup for V8 wasted spark.

4 X VB921 coil drivers.
-the 4 Drivers are assembled on the adaptor board..

2 more VB921 coil drivers. :20$ now 10$

6 cylinders wasted spark .
3 double coils needed.
6 towers coil pack or 2 double coilpack 2 towers (GM type, Bosch...)

3 X VB921 coil drivers.
-the 3 Drivers are assembled on the adaptor board .

1 more VB921 coil drivers. :5$

8 cylinders wasted spark .
4 double coils needed.
Two Ford 4 towers coil pack or 4 double coil pack 2 towers (GM type, Bosch...)

Same setup for 4cyl. 1coil/cyl..

4 X VB921 coil drivers.
-the 4 Drivers are assembled on the adaptor board.

3 more VB921 coil drivers. :20$ now 15$

Idle control

PWM or on/off idle control (V3 and V3.57) . External free running diode(1n4001) is need to the valve.Can be install on the adaptor board.

Works with 2 pins idle valve. ex Ford, Audi/VW idle valves.

IRFZ44 mosfet added

This output can be use for general purpose output. GPIO.

Power mosfet driver :10 $

IAC stepper idle (MS2 only).

4 nice wires between processor IAC output to the IAC output pins.

4 wires:5$

Call for more options

Processors

MS2 daugher board

98$ , shipping 10$, stock 1

stock: 3

MS2 chipr :95$

MS1 chip

22$ ,shipping 9$

stock:4

stock: 3

MS1 chip:20$

Harness, wiring, tuning cable


Two cables harness 14 pins input harness 16 pins output harness Power and grounds wiring	see details	Wiring:52$ shipping: 15$. included with ECU
Add 2 foot	x$/foot

Tuning cable DB-9 to DB-9, 6 foot 6$, shipping9$	stock:2	DB-9 Tuning cabl e:6.5$

shipping 9$

Accessories

6 positions fuse holder . Very useful to wire megasquirt. Use in all our installations. 20$		Fuse box :15$ stock:20, shipping 9$
Water proof fuse holder Pigtailed 10.5$		Fuse holder:5$ stock:20, shipping 9$
Relay 10.5$		Injector connector :10.0$each stock:4, shipping 9$
Injector connector GM type 5.5$/ each qty 2 minimum		Injector connector :5.50$each stock:50, shipping 9$
Injector connector GM type 12 inchs Pigtailed 6.5$/ each qty 2 minimum		Injector connector 6.50$each stock:50, Qty 2 min. shipping 9$

shipping:8$

Adaptor board

Adaptor kit Included: 14 and 16 pins board connector 14 and 16 pins cable connector 30 female pins strip pins		Adaptor kit: 28.0$each stock:20


2 coil driver VB921 kit for wasted spark 4 cylinders or 2cyl. 1coil/cyl. applications. VB921 should be bolted to the cover.	add 10$
4 coil driver VB921kit for wasted spark 8 cylinders or 4cyl. 1coil/cyl. applications applications. VB921 should be bolted to the cover.	add 20$

Shipping 5$

Electronic Parts

VB921 Coil driver
qty 2 min.
-Ref.Q16 :ignition coil driver

IRFZ44
qty 2 min.
-Ref.general purpore driver(Idle PWM). Mica isolator included.

IRFZ34
qty 2 min.
-Ref.Q1, Q5;injector driver

TIP125
qty 2 min.
-Ref.Q9, Q12

TIP42
qty 2 min.
-Ref.Q11, Q3

Shipping

Quebec,Canada.

Quebec North cost to Montreal area:
Dicom 25$ for ECU include wiring, relays and fuse box shipping fees. The buyer will refound the over shipping fees.
Canada post for all other items.
Outside Quebec: Canada Post

USA:25% canada poste.

Overseas: email before buy.

Combine shipping fees for multiple articles.

Payement

The default payement is paypal but lot of buyers in Quebec use . email for account.